Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

unmatched key points in conformal

Status
Not open for further replies.

nohj_yar

Junior Member level 1
Junior Member level 1
Joined
Jan 16, 2015
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
133
Hi all.. THese are the few lines that i extracted in the logfile using conformal. And i have a few questions.

// (F30) Ignored 3 weak device(s) due to the existence of strong device(s)
// Warning: Golden and Revised have different numbers of key points:
// Golden key points = 14
// Revised key points = 26
// Mapping key points ...
// Warning: More than 1/3 of the key points have mis-matched names


What does the line "// (F30) Ignored 3 weak device(s) due to the existence of strong device(s)" means?

How do i resolved the unmatched key points and the mismatched names?

Thanks..:)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top