Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Universal SMPS design

Status
Not open for further replies.

Bartart

Full Member level 2
Full Member level 2
Joined
Feb 20, 2002
Messages
124
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Location
Europt
Activity points
1,107
Hi there,

I need some advice and guidance.

I have this design specifications for the almighty SMPS :(

1)Input Voltage : 24V-270V AC/DC (Universal Range)
2)Power Rating : 20W
3)Output Voltage : 20VDC
4)Output Current : 1 - 2A
5) Isolated

Add 1) I have troubles with this specification. Mainly ICs used in AC/DC converter operates from 80V-260V basicly because they are used to convert from 230VAC to xxx DC. Because of this feature I have to design the Voltage detector and the switching mechanism which will switch between high input voltage converter to low voltage converter.

Any idea how to solve this ?

Thanks for your help, Sasa


P.S. the 6th and 7th req. cheapest and smallest as possible :D

- - - Updated - - -

;-) Golden role. Use search before post new topics https://www.edaboard.com/threads/244298/
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top