yefj
Advanced Member level 4
Hello,in the simulation example bellow out Vs=2V rho is the definition of reflection coefficient.
gamma_g=(50-30)/(50+30)=0.25
gamma_L=(10000-30)/(10000+30)=0.25
but in plot of rho they start with -0.25 (not 0.25) then it rises to 1.6 where as in my calculations if we look at the point V_TDR
we start 2*0.25=0.5 then 0.5 is multiplied by 1 at the load and return o the V_TDR as 0.5+1.
But as you see in the simulation its acting a lot different both the VTDR plot and the rho plot are totaly different.
Where did i go wrong?
Thanks.
gamma_g=(50-30)/(50+30)=0.25
gamma_L=(10000-30)/(10000+30)=0.25
but in plot of rho they start with -0.25 (not 0.25) then it rises to 1.6 where as in my calculations if we look at the point V_TDR
we start 2*0.25=0.5 then 0.5 is multiplied by 1 at the load and return o the V_TDR as 0.5+1.
But as you see in the simulation its acting a lot different both the VTDR plot and the rho plot are totaly different.
Where did i go wrong?
Thanks.