Hi FvM,
Thank you for the quick reply. I had a look at the previous posts but I still have some missing pieces.
I am trying to get a constant current source using the above schematic. To output a current of 1 mA from an input voltage of 3.3V, I believe I need to have matching resistors for R6, R7, R9 and R10 = 33KOhms and my R8 should be around 3.3Kohms. So my question is, the resistors R6-10, will they influence the current running through the circuit or the only resistor that matters is the R8?
Sorry if its a naive question, I am still learning. Thank you in advance for the help.