Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Unable to find ML605 JTAG Driver

Status
Not open for further replies.
S

SharpWeapon

Member level 5
Member level 5
Joined
Mar 18, 2014
Messages
89
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Visit site
Activity points
705
Hello,

I can't find the right driver for ML605 JTAG cable. Win 7 says I have already installed the driver yet Chipscope is not able to detect. Where can I find it?

Thanks!
 

I took a look at the ML605 web page and there appears to be two USB ports on the board, are you sure you hooked it up to the configuration port? Chipscope will require that the USB be connected to the USB configuration port and not the BIST port.
 

There are two ports on the board, the USB UART and USB JTAG port. I am using the JTAG port to connect to the board and through a chip controller via USB to the PC. I still can't find anything working.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top