Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

UMC 0.18 or 0.13um mixed-mode PDK ?

Status
Not open for further replies.
O

openwindows

Junior Member level 3
Joined
Jan 18, 2002
Messages
28
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
102
Jimi2003 said:
Could someone share PDK of UMC 0.18 or 0.13um mixed-mode process ?
Wondering the possiblity in improvement of layout productivity, can someone share experience on this.
Click to expand...

who have TSMC 0.13um mixed-mode PDK ?
 

1. Increase metal-via end enclosure
2. use at least 2 vias wherever possible.
3. Use larger spacing between metals wherever possible.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top