Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Uisng LwIP with onchip 64k BRAM

Status
Not open for further replies.
M

melexia

Member level 2
Joined
Jun 2, 2008
Messages
43
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,620
Hi all,
I am trying to use LwIP for developing UDP/IP stack in microblaze. Unfortunately I dont have any memory available on board so I have to use internal BRAM as LMB.
But when I started coding for the same I found that I will have to use lwip_init() function to initialize LwIP and it is not fitting into available memory. What should I do or is it like my conclusion is wrong it should work with the 64k BRAM also.
Please help.
 

I had used on board 32M x 16 DDR2 SDRAM for lwip. Sorry no solution mate.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top