Hello,
I am working on the design of the UART protocol using the Cortex M3. In that context i will use three type of frame, a configuration frame, a data frame and an acknowledgment frame.
So i was wondering if you can help me to get some information about an UART frame (header, tail....)?
Thanks in advance.
Khalil
Thanks for your response,
I know that in the physical layer, the UART frame format is set to 10 bits 8 bits of data with start bit and stop bit. While i have to define an UART frame in a higher layer for example i have to define a configuration frame that will be as follow: header+baudratevalue+data bits+parity+tail.
I was wondering if that concept is wrong or right and how we set the header and the tail?
Thanks in advance.
Khalil