two switch and led interface with 8051

[hirenn]

Hi

i have connected two switches with P1.0 and P1.1 and led at p1.2

swtches are spst , led is 5mm red
my logic is like

if sw1 and sw2 are not pressed then led off

if sw1 is pressed on led for 10 seconds, and check for sw2 after 10 seconds
if sw1 not pressed led off

if sw2 is pressed led continuous on
if sw2 not pressed then off led and check for sw1

idk how to do this

anyone please help me


thanks

 

[FenTrac]

Here is a sample program in c to look at.


View attachment 8051_hlp.txt