Hello,
of course, nobody but you should do the main work - however, perhaps some remarks are helpful:
* To solve the task, you must have some basic knowledge on FET amplifiers (operating point, gain calculation)
* You also should know something on tuned circuits (resonant effect, bandwidth, center frequency, Q factor)
* The inductor is not in the source path but a part of the "working" load impedance that is connected to the drain node.
* Question: Can you recognize that (and why) - in principle - the circuit acts as a bandpass?
* Do you know which part determines (limits) the maximum gain?
_________
My recommendation: Before starting to solve the task, try to answer these points.
Good luck
LvW
---------- Post added at 22:14 ---------- Previous post was at 21:31 ----------
One additional point: You should try to find out, which reactive parts mainly determine the bandpass characteristics (and which are less important - and why).