TRS connectors pinout

Status
Not open for further replies.

emre886

Newbie level 5
Joined
Oct 18, 2011
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,334
Hi;
I will use 3.5 mm TRS connector for mic input. There are different pinouts on the web. Which pins must i use for mic audio and ground?
 

There are different pinouts on the web.
There are different pinouts of real devices. Standard is stereo microphone, L and R at tip and ring, both with a power supply pull-up resistor. Alternatively I have seen mono microphones, signal at tip, separate power supply at ring.
 

As FvM wrote , There are different pinouts of real devices. True , there is many.

Even one connector can have many different names.
A TRS connector (tip, ring, sleeve) is a common family of connector
typically used for analog signals including audio. It is cylindrical
in shape, typically with three contacts, although sometimes with two
(a TS connector) or four (a TRRS connector).
It is also called an audio jack, phone jack, phone plug, and jack plug.
Specific models are known as stereo plug, mini-jack, mini-stereo,
headphone jack, tiny telephone connector and Bantam plug.

Here is some pinouts..........

 

Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…