Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Train detection system

Status
Not open for further replies.

kicom

Junior Member level 1
Joined
Mar 31, 2012
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,410
Guys,

Please suggest me the methods of detecting distance to train and its speed that you have come across.
one obvious is GPS/GSM methods:)

Thank you
 

Fading loss makes RF unreliable estimator but beats nothing using ISM band directional coded channels.

Hot box network is most reliable, GPS is more resolution.

Comm protocol best in use is MPT1327 trunking system
 
  • Like
Reactions: kicom

    kicom

    Points: 2
    Helpful Answer Positive Rating
What accuracy you need, for what application ?

It should be accurate within 5m and speed in 1 decimal.
Application is to detect speed and distance from a station
 

Fading loss makes RF unreliable estimator but beats nothing using ISM band directional coded channels.

Thanks
But what do you mean by using RF signals for detection systems???
 

Those requirements demand GPS at a minimum and perhaps differential GPS repeaters along the path especially underground.

What's your budget?

My target is to develop other than a GPS system.That's why i'm looking for other possible methods.
Budget should be less than USD200.
 

Over what distance range from the station does this have to operate?
 

Unfortunately laws of physics might restrict the feasibility of your project.

Reviewing the electromagnetic TOF method in your previous thread. https://www.edaboard.com/threads/321208/
you're apparently trying to implement a passive detection system without additional equipment installed in the train. The only reliable methods to achieve this would be optical or microwave radar, limited to line of sight and involving a relative large angle where other moving objects (e.g. cars) will cause erroneous detection.
 
  • Like
Reactions: kicom

    kicom

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top