swchuck
Newbie
Hi
for model railway.
I would like to use this circuit to toggle a dpdt relay to reverse polarity on track. The relay will be a dual coil latched, a type XO43 12 volt.
Is the toggle arrangement on the above circuit suitable ?
Instead of a pushbutton it will have a IR sensor to indicate movement, when first sensed it will change over the polarity and next sense it will be reset
to the original and so on.
Because the relay is dual coil (and dpdt) will this circuit make it work.
Thanks
Charles Harris
for model railway.
Toggle switch using CD4017
This circuit will help you to control two devices with the help of a switch. If you "on" the first device then second device remain "off", and if you "on" the second [[wysiwyg_imageupload::]]device the first device will become "off". Therefore you can control both the devices with the help of...
www.engineersgarage.com
I would like to use this circuit to toggle a dpdt relay to reverse polarity on track. The relay will be a dual coil latched, a type XO43 12 volt.
Is the toggle arrangement on the above circuit suitable ?
Instead of a pushbutton it will have a IR sensor to indicate movement, when first sensed it will change over the polarity and next sense it will be reset
to the original and so on.
Because the relay is dual coil (and dpdt) will this circuit make it work.
Thanks
Charles Harris