Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Thinget PLC's problem with the input, display

Status
Not open for further replies.
A

afef salhi

Newbie level 1
Joined
May 14, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
prolem

I am using Thinget PLC's,i have the type of module expansion XC-E4AD2DA I has a problem of the input of module expansion of the voltage value,the ID100,ID101,ID102et ID103 is not work same time ,i want the display changing at the same time and the value voltage is variable but is not work in same time is work ID100 then ID101 then ID102.. and me i like the input voltage variable change in same time .
I have change the plc and expansion but the same problem
please tell me where is the problem exactly
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top