Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

The noise of current mirror on current steering DAC

Status
Not open for further replies.
C

caosl

Advanced Member level 4
Joined
Mar 26, 2006
Messages
114
Helped
17
Reputation
34
Reaction score
4
Trophy points
1,298
Activity points
1,969
current mirror noise

hi,all
In a Delta Sigma Modulator +Current steering DAC, the circuit noise of current mirror is so large(13 levels, 25uVrms integrated in 20-20k), fully differential output, use both NMOS and PMOS current mirror.
Anyone has an idea to improve this, thanks very much
 

I know you posted this a very long time ago but you need to put decoupling caps within your current mirrors to remove the noise. You can also put in filters inbetween the diode connected transistor which biases up each element within your DAC.

Jgk
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top