Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Tester clock - two clocks: 240Mhz and 1.2GHZ

Status
Not open for further replies.
K

kiranks9

Member level 3
Joined
Feb 21, 2008
Messages
59
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,288
Activity points
1,648
Tester clock.

In IP, there are two clocks one is at 240Mhz and other one 1.2GHZ. I generated the patterns and how to check the patterns in tester? becuase Tester should not support such high frequency. I know one solution is using these clock, run at slower frequency i.e shift frequency. Is there any other method, check these on tester? Is there any dedicated test clock for each tester? Please lete me know
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top