Eng.AH
Newbie level 6
- Joined
- Mar 24, 2010
- Messages
- 14
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Well, It's a good place
- Activity points
- 1,374
Hi geniuses people,
I'm facing a problem with, controlling the MOC3021 (non-zero crossing) with the PIC16f876A. In order to control the main triac. the objective is to control the power delvired to the load ( heater).
there should be a sinkro signal from the AC lin 220V. The PIC knows when the sine wave starts.
the problem I' facing is : I CANNOT CONTROLLING THE POWER IN SPIT OF THAT I MADE EVERY THING RIGHT!!
Please guys... help.
the circuit is attached, with the c code.
I'm facing a problem with, controlling the MOC3021 (non-zero crossing) with the PIC16f876A. In order to control the main triac. the objective is to control the power delvired to the load ( heater).
there should be a sinkro signal from the AC lin 220V. The PIC knows when the sine wave starts.
the problem I' facing is : I CANNOT CONTROLLING THE POWER IN SPIT OF THAT I MADE EVERY THING RIGHT!!
Please guys... help.
the circuit is attached, with the c code.