sp2012
Junior Member level 3
Hi guys,
I am using telit GL868 module.Here my simcard is not detected.
My checking procedure,
>>AT+SIMDET?
telit response as
>>ERROR
I checked SIMMVCC it always 0v only.
Telit module condition:
Telit supply voltage(VBATT,VBAT_PA(37,38 pins)) = 4.01V
PWRON pin(43) = 2.82V(power on mode)
AGND = ground.
Pin 5,6 = ground.
RX,TX = With voltage divider circuit and connect to micro controller
please tell me solution.
I am using telit GL868 module.Here my simcard is not detected.
My checking procedure,
>>AT+SIMDET?
telit response as
>>ERROR
I checked SIMMVCC it always 0v only.
Telit module condition:
Telit supply voltage(VBATT,VBAT_PA(37,38 pins)) = 4.01V
PWRON pin(43) = 2.82V(power on mode)
AGND = ground.
Pin 5,6 = ground.
RX,TX = With voltage divider circuit and connect to micro controller
please tell me solution.