I have some problems with the NCSU_TechLib_FreePDK45:
- I looked for the file divaDRC.rul for the DRC but I did not find it.
- cadence is not able to integrate the FreePDK45.tf technology file.it shows me an error that it fails to load it.
I think this is the cause of the problem that prohibits me to visualize the low layers of the layouts of the components to interconnect.
Is there another tech library that I can download to solve thes issues.
Thanks
the error says that cadence fails to load FreePDK45.tf
it shows a lot of errors on the CIW
should I change the hole tech library ?
If yes, Is there another one that I can download ?
Thanks
I have no idea if the file you are using is meant for virtuoso. You say the extension is .tf, but other tools/formats also use that extension. The messages don't give any hints about what is going on.
If you change the tech library, you change the technology. I can't possibly know if you are allowed to do that. Is this homework? Maybe ask the instructor/boss/support person...