Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

TCAD Sentaurus - incomplete ionization

Status
Not open for further replies.
I

imad11

Newbie level 1
Joined
Sep 12, 2014
Messages
0
Helped
0
Reputation
0
Reaction score
0
Trophy points
0
Activity points
0
I'm trying to simulate a pDBR structure of AlGaAs with the incomplete ionization model activated. While activating the model itself affects the simulation result and I see the doping concentration and IV curve affected, changing the model parameters ("Ionization") of the AlGaAs materials seems not to be taken into account. I made sure that in the log file the standard values (called "Shallow Trap") are actually replaced by the values I provide, but still they have no effect whatsoever on the result. I'm suspecting the model all together is faulty in Sentaurus. any ideas?
thanks!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top