Task about FM system modulation

Status
Not open for further replies.
T

TRIDIP

Newbie level 5
Joined
Jun 1, 2005
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,348
In an FM system freq deviation is 4 khz when the modulating voltage is 3V & modulating freq is 400hz.If the mod freq increases to 1000hz & its amp to 5 V,then mod index will 1.remain same 2.increase3.decrease????

An FM wave is 100% modulated by 10 khz signal,Hw much BW require???

anybody knw answer plz reply
 

Re: FM

Modulation idex is defined as β = Δf/fm

Where Δf is frequency desviation which depends on the modulation signal amplitude (voltage) ( two values in the question).
fm is the instantaneous frequence of modulation signal ( two values in the question)

If you consider theoretical formula given above you should compare the ratios 5/3 to 1000/400 where the first is lower, so modulation index will decrease.

In the second question the answer for BW cannot be given precisely since you can consider Carlson's Rule or Universal curves these methots give diferent answers.
If you take Carlson's Rule you just use its formula BW =2Δf(1+1/β)

β=1 => Δf=10khz the answer probably is 40Khz

Regards
 

    T

    TRIDIP

    Points: 2
    Helpful Answer Positive Rating
Re: FM

thanks for your reply,in 2nd question 100% modulation means is β=1??
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…