synthesis for gated clock and muxed clock

Status
Not open for further replies.
Q

qjlsy

Member level 3
Joined
Apr 26, 2004
Messages
63
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
653
For a gated clock design, what special DC constraints need to be added?

And how about those for a muxed clock design?

Thanks a lot!
 

set_clock_gating_style -positive_edge_logic {integrated:TLATNCAX1} -max_fanout 5
set_clock_gating_signals -design design_name
elaborate design_name -gate_clock
report_clock_gating -gated -ungated -hier -verbose -gating_elements >report

For Muxed Clock use set_disable_timing.
or set_case analysis while STA

regards
 
could someone please explain what's doing each of the command in the previous post?

- - - Updated - - -

why a max fanout should be defined for the gating style?
should not the clock gating signals be listed explicitly?
why gating on positive_edge_logic? does it mean that gate be inserted for the falling edge?
 
Last edited:

set_clock_gating_style -positive_edge_logic -max_fanout 5 --> Tells we are trying to gate clock low: Fanout is mentioned not to load
set_clock_gating_signals -design design_name --> Mentioning the hierarchy
elaborate design_name -gate_clock --> Elaborating design with gating enabled
report_clock_gating -gated -ungated -hier -verbose -gating_elements > report --> Generate Report
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…