Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Suggestion on Designing of Charge Pump and PFD...

Status
Not open for further replies.

girih192002

Full Member level 2
Joined
Aug 4, 2007
Messages
130
Helped
19
Reputation
38
Reaction score
11
Trophy points
1,298
Location
India
Activity points
2,115
pfd pump

Hello,

Do me a favor? I am designing Charge pump & PFD for PLL 500 to 1000 MHz Frequency range and i need 0.4 to 1.5 V tunning voltage to get generate from charge pump for VCO. Could you guys provide me some good papers, thesis or technical material or link for ?

I will very thankful of you.... :D
 

rhee high performance charge pumps

You can read these papers as reference.Hope it will be help you.

[1].J.Maneatis et al.,”Self-Biased High-Bandwidth Low-Jitter 1-to-4096 Multiplier Clock Generator PLL,”IEEE J.Solid-State Circuits,vol.31, pp.1795-1803,Nov.2003.
[2].Ian A.Young,”A PLL Clock Gernerator with 5 to 110 MHz of Lock Range for Microprocessors,”IEEE J.Solid-State Circuits,vol.27, pp.1599-1607,Nov.1992.
[3].L.Dai and R.Harjani,”CMOS Switched-Op-Amp-Based Sample-and-Hold Circuit,” IEEE J.Solid-State Circuits, vol.35,No.1, pp.109-113,Jan.2000.
[4].Mohamad El-Hage and Fei Yuan,”Architectures and Design Considerations of CMOS Charge Pumps for Phase-Locked Loops”
[5].R.C.chang and L.C.Kuo,”A new Low-Voltage Charge Pump Circuit for PLL”,IEEE International Symposium of Circuits and Systems ISCAS, Switzerland, pp.701-703, May 2-5,2000.
[6].J.Maneatis,”Low-Jitter Process-Independent DLL and PLL Based on Self-Biased Techniques,”IEEE J.Solid-State Circuits, vol.31, No.11,Nov.1996.
[7].W.Rhee,”Design of High-Performance CMOS Charge-Pumps in Phase-Locked Loop,”in Proc.ISCAS,vol.1, pp545-548,1999.
[8].Esdras Juarez-Hernandes and Alejandro Diazsanchez,”A Novel CMOS Charge-Pump Circuit with Positive Feedback for PLL Applications,”in Proc.ICECS, vol349-352, 2001.
[9].Jae-Shin Lee et al.,”A Charge Pump with Perfect Current Matching Characteristics in Phase-Locked Loops,” in Electronics Letters,vol.36,pp.1907-1908,9 nov.2000.
girih192002 said:
Hello,

Do me a favor? I am designing Charge pump & PFD for PLL 500 to 1000 MHz Frequency range and i need 0.4 to 1.5 V tunning voltage to get generate from charge pump for VCO. Could you guys provide me some good papers, thesis or technical material or link for ?

I will very thankful of you.... :D
 

important factor in designing a charge pump

really good staff
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top