Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

STM32F103VCT6 LQFP-100 and STM32F103VET6 LQFP-100?

Status
Not open for further replies.

bianchi77

Advanced Member level 4
Joined
Jun 11, 2009
Messages
1,313
Helped
21
Reputation
44
Reaction score
20
Trophy points
1,318
Location
California
Activity points
9,442
Guys,

Can I use STM32F103VCT6 LQFP-100 board with STM32F103VET6 LQFP-100?
I saw from the datasheet, the different is only the flash memory,
STM32 Part numbering.jpg
Any ideas ?
thanks
 

Ok, then so it's fine using VE series on VC board ?
thanks

- - - Updated - - -

Please have a look the datasheet attached, thanks
 

Attachments

  • STM32F103xC_D_E.pdf
    1.7 MB · Views: 80

The series/product line is actually the STM32F103, the C, D and E represent a different part/model of that particular series/product line.


BigDog
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top