STM32 Embedded Target for MATLAB and Simulink

[iruraz]

Hi All,

I tried to integrate STM32F4XX 's (it is STM32F4 Discovery for me) tool to Simulink but I couldn't success it. Is there anyone who has experience about it? I don't know how I setup it in Matlab. Here is below the links are for STM32F4XX and Matlab:

https://www.mathworks.com/products/connections/product_detail/product_75144.html

https://www.st.com/web/catalog/tools/FM147/CL1794/S  C961/SS1533/PF258513?s_searchtype=partnumber

Regards.

 

[yura717]

Do you have all toolboxes installed?
MathWorks products required:

MATLAB
Simulink
Embedded Coder
MATLAB Coder
Simulink Coder
Platforms
Windows

**broken link removed**

 

[iruraz]

Do you have all toolboxes installed?
MathWorks products required:

MATLAB
Simulink
Embedded Coder
MATLAB Coder
Simulink Coder
Platforms
Windows

**broken link removed**

@yura717, thanks for your reply. I downloaded matlab 2013a and it contains Simulink, Matlab Coder, Simulink Coder. There is Embedded Coder tool in Simulink, but there are only TI 's processors in it. Is Embedded Coder seperate tool which you mentioned above?

**broken link removed**

Regards.

 

[yura717]

**broken link removed**
Waijung Blockset
Currently, Waijung has been designed specifically to support STM32F4 family of microcontrollers (STM32F4 Target) which is a Hi-Performance & DSP MCU from STMicroelectronics.
Absolute Minimum
1.Microsoft Windows XP SP3 or later. (Windows 7 recommended.)
2.Mathworks Inc. software suite consisting of the following toolboxes and blocksets.

Release R2011a or later
Matlab
Simulink
Real-Time Workshop
Real-Time Workshop Embedded Coder


or


http://www.st.com/web/catalog/tools/FM147/CL1794/SC961/SS1533/PF258513

 

[iruraz]

**broken link removed**
Waijung Blockset
Currently, Waijung has been designed specifically to support STM32F4 family of microcontrollers (STM32F4 Target) which is a Hi-Performance & DSP MCU from STMicroelectronics.
Absolute Minimum
1.Microsoft Windows XP SP3 or later. (Windows 7 recommended.)
2.Mathworks Inc. software suite consisting of the following toolboxes and blocksets.

Release R2011a or later
Matlab
Simulink
Real-Time Workshop
Real-Time Workshop Embedded Coder


or


http://www.st.com/web/catalog/tools/FM147/CL1794/SC961/SS1533/PF258513

I haven't found any source without Waijung 's blockset. I looked STM 's website but there was nothing clear. I downloaded "STM32-MAT/TARGET" from its web page but I don't know what next step is. Is there any solution without Waijung 's blockset?

Regards.

 

[yura717]

I don't know what next step is.

Next step is ... you need learn how to use Matlab.

 

[iruraz]

Next step is ... you need learn how to use Matlab.

Thanks this is very helpful..