STI5518BVC and Intel TE28F160 Flash - Powersky 8210CISKV

[Anjaansa]

intel te28f160

Dear Friends!

i have a problem in my Powersky 8210CISKV with the boot and i need to flash it with Jtag. i modified the Ird and flash definitions as following:

IRD, 23, "PS-8210", 1, 1, 1, 1, 2, 2, 0x7FFFFFC0, 0x7FFFFFC4, 0x7FFFFFA0, 0x7FFFFFA8, 0x7FFEFFF4, 0x7FFEFFF8, "11L", 1, 1
IRDFlash, 23, "Flash 1(28F160)", 0x88C2, 0x50000000, 0x200000, 2, 2, 0

Flash, 23, "28F160", 0x88C2, 0x200000, 1, 1, 0, 2, 32, 1
Sector, 23, 32, 0, 0x10000

FlashMfg, 0x89, "Intel"

it works, and i can reach to the flash programming menu, all buttons for Erase, Read and Programm are enabled but Once i click erase, it takes too much time and returns without erasing the flash (also without any error. and when i click program and select files, it says flash is not blank continue any way?

and it interuppts writing the flash with a message "error writing on sector 7FE00000"

It detects :
Device ID = 0X1D405041
Device = STi5518MVB-X

Please help me what i shall do?

shall i redefine the processor as STi5518BVC instead of STi5518MVB-X and what other parameters are required?

Shall i redefine the IRD and Flash Definations. if some one can please can make the Jkey.def file and send me on my email address at Nisar@hotmail.com, i shall be highly apprciated.

I have an unbuffered Jtag described at **broken link removed**, the same Jtag i used before to flash a (World In BOX) star track FTA receiver and it worked great.

Thanks in Advance
(sorry for my long first post ever)
AnjaanSa

 

[jaures20021]

omega sti5518bvc

for intel 28Fxxx you need to unlok flash before programming
here igive you all you need to unlock and erase the flash
exuse me i don't speak inglish very wel

 

[domget]

sti5518bvc

Hello ALL,

I've got the 88:88 badly known and I'm to "Jtag" my 8210.
I've seen previously that It is needed to unlock the memory. How to do it on my 8210 equiped with an OMEGA STi5518BVC since Jkeyx refuses to erase memory (before loading a new .bin)
Jkeys refuse also to detect the 8210 ("error reading from IRD-DCU peek")
Thanks for help,
Dominique

 

[mutanda]

te28f160

I am also having a problem reading the te28f160. I have noticed that u have put in an unlock bin . How do I go about loading the unlock bin ?:!:

 

[aisam]

sti 5518bvc

thank you friends for yours helps.

Added after 4 hours 52 minutes:

dear friends

i need help for the processes te28f160 , i need know how i can program this processus and how i can find the programmeur of the te28f160.

sorry for long msg and thanks.

 

[yoloksky]

powersky ps-8210

dear sir,

i need unlock bin for the following

m58lw032d and 29lv160db

please help,