Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Steppermotor controller driven by a PIC

Status
Not open for further replies.

The Puma

Full Member level 2
Joined
Apr 4, 2002
Messages
134
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
895
steppermotor controller

Hallo,

I need a schematic with the L293 en L297 steppermotor driver chip to drive a steppermotor controlled by a PIC

Who can help, maybe with a good site for info
 

Get the PIC do do all the work....
Do a search on google for "linistep"

If you are willing to try another micro then look in this and last months Circuit Cellar mag... there is a project to drive 4 steppers using the chips you want to use. The mags are available on the board.
 

I believe Microchip has the application notes for that. Try search their website.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top