gmarocco
Junior Member level 1
- Joined
- Nov 7, 2011
- Messages
- 15
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,408
I would like to build a DC-DC converter that with a command is able to switch its output voltage from 12V to 14.5V. I am thinking about changing the resistor between the FB pin and the SW pin of LM2673 by using solid state relay.
Before building it I am wondering if there are any issues during the relay's turn-on/turn-off phase. I attach the schematics
RegardView attachment digitally_tunable_stepdown.pdfView attachment digitally_tunable_stepdown.pdf
Before building it I am wondering if there are any issues during the relay's turn-on/turn-off phase. I attach the schematics
RegardView attachment digitally_tunable_stepdown.pdfView attachment digitally_tunable_stepdown.pdf
