Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
To create std cells following points are important
1) design the std cell layout within as less area as possible, because std cells are repreated, their area should be optimum
2) To avoid metal jogs, calculate the via size and overhang. With the obtained thickness value route the metal\
3) Place the pins as nearer to boundary as possibl to make them easily accessible
4) Avoid poly routing.