Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Stage speaker columns STX GDN30-400-8SE +D800TI

Status
Not open for further replies.

gres

Full Member level 4
Full Member level 4
Joined
Nov 30, 2009
Messages
210
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
4,573


Columns have been made for last new year's party . they are supplement for my basic sound system for partys. Firstly i made order at STX and the same time I was making casings for them. There wasn't any complications so effect is satisfactory.
Branch is on diagram, with split about 1,5kHz

Case buidling

Ready casings, painted by nitromal lacquer, I got very nice texture

Branch elements

Brench redy, additional bulb 24V 21W Althought i couldn't fing nothing else this set up wors well, columns got about 150W

Ready speakers, only bezels are missing. I want to make them with some material, but I don't have any ideas yet. What is still missing is : rubber legs, slot for stative ( to be honest i don't need that)

Unfinished rack, 6U high

I'm really pleased with that speakers. You wan't find anything better at this price. They are built up with 15mm Mdf and 12mm strand, construction is very light, but still very stiff and stabile. Adjust for about 60Hz, dimennsions : high*width*deep 62*40/20*42cm
Text cames from https://www.elektroda.pl/rtvforum/topic1529762.html
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top