neo_anderson
Newbie level 5
Hi,
After addstripes, I run the sroute.
I have a lot of memory blocks in my design around the corners.
As i perform sroute, I see that my vdd! nets (the followpins) is not connected to the blockring but it managed to place via for the gnd! followpins.
Similarly at the IO pads, the gnd! nets of the followpins is not connected but vdd! gets connected.
Any help would be appreciated.
Thanks a lot,
After addstripes, I run the sroute.
I have a lot of memory blocks in my design around the corners.
As i perform sroute, I see that my vdd! nets (the followpins) is not connected to the blockring but it managed to place via for the gnd! followpins.
Similarly at the IO pads, the gnd! nets of the followpins is not connected but vdd! gets connected.
Any help would be appreciated.
Thanks a lot,