There are lots of programs that go the other way (schematic -> spice netlist). I have not seen any of the variety you are asking for. What you are asking for would be very nice since there are lots of spice models that are netlist-only. Have you checked the open-source EDA websites -- that might be worth a shot.
But to draw a circuit there should be a pattern match which identify a specific circuit topology. Then a specific drawing engine could produce a nice schematic. That works pretty good for logic gates (Verilog&Spice) and logic gate circuits (Spice). But analog circuits are ugly drawn.
The problem is that the engine should be contructed so that it search an existing schematic database and extract grafic construction rules which are used for automatic schematic generation.
Concept Engineering is market leader and the tool is integrated in all leading debugging tools of other vendors.
Thanks a lot it looks good tool, but I wated to know if I give a Pspice netlist, it should generate lumped equivalent schematic...
And Hello hr_rezaee,
I don't know about Agilent ADS, can you tell us how it converts Spice netlist into Schematic?:?:
I searched in the google but it looks it could not find the same data...
Please provide me the details:!:
The tool also convert spice netlists into schematics. I think it could also take PSpice. Most tools are target the HSpice flavor of Spice. So a script could possible translate PSpice into HSpice flavor.
If you doing reengineering a hierachical netlist of small circuits 10-50 is more useful if it does not follow the gate style.
If you have flat netlist there are companies like chipworks which have ther own tool to generate reports for their customers.