1. comp. U1 532 pins, 0.8mm pitch (need to use via1)
2. comp. U2 357 pins, 1.27 mm pitch (need to use via2)
3. comp. U3 256 pins, 1 mm pitch (need to use via3)
rest of board need to use via4.
how to tell specctra fanout with this rules and then to route board with via4 ?
1. comp. U1 532 pins, 0.8mm pitch (need to use via1)
2. comp. U2 357 pins, 1.27 mm pitch (need to use via2)
3. comp. U3 256 pins, 1 mm pitch (need to use via3)
rest of board need to use via4.
how to tell specctra fanout with this rules and then to route board with via4 ?
you have ti load the board into spectra and sellect u1 for funout.
then sellect via 1 for funout and run the funout only for the sellected item.
then select u2 for funout with via 2 and run, and so on.
for the rest of the board select via 4 and run.
you have to do it step by step.