woody28
Member level 3
Dear friends
I have problem in my design.
There is a relay that must be switch a high voltage low current capacitive load but when relay go to switch a big spark occurs between contacts.
Circuit worked as electronic clutch for “Elko” AC motor that originally work mechanically in motor and I convert it to electronic version. Every thing is ok except relay .
please give me a good solution.
I have problem in my design.
There is a relay that must be switch a high voltage low current capacitive load but when relay go to switch a big spark occurs between contacts.
Circuit worked as electronic clutch for “Elko” AC motor that originally work mechanically in motor and I convert it to electronic version. Every thing is ok except relay .
please give me a good solution.