Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Sot23-5 / Sot323-5 Case markings

Status
Not open for further replies.
I

IRECAD

Newbie level 6
Joined
Apr 1, 2009
Messages
12
Helped
3
Reputation
6
Reaction score
0
Trophy points
1,281
Activity points
1,347
sot23 marking

Hi,
I'm trying to identify 2 devices by their markings one is a SOT23-5 & is almost certainly a 5V regulator (7.5V in) Pin 1 is Vo Pin 5 is Vin the case has the following marking on it - "J242W"
the Second could be a regulator but I'm not as sure on this its a SOT323-5 & has "1C1" marking. Any help greatly appreciated.
 

J24 R1154N001C SOT23-5 150mA Voltage Regulator (Wide ... RIC

:)
good luck!

David
 
Last edited by a moderator:
  • Like
Reactions: pcbmcu

    P

    pcbmcu

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top