Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

some questions on modbus

Status
Not open for further replies.
A

ajrox

Newbie level 6
Joined
Nov 26, 2013
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
110
I have some questions for modbus protocol.(rtu format)
  1. What are the start and stop bits for each byte that have to be appended?(modbus documentation does not mention this)
  2. Do all the bytes that have to be transmitted(namely-address byte,function byte,data bytes and crc bytes) have start,stop & parity bits?
  3. Is the baud rate for a particular network in modbus fixed?(9600 or 19200)
  4. What is the difference between coil and register in modbus terminology?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top