Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Socket/Connector set witch breaking circuist

Status
Not open for further replies.

orti

Newbie level 6
Joined
Jul 21, 2002
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Spain
Activity points
8
Socket/Connector set

I'm looking for a socket (connector) set (male and female) with the following characteristics:

a) Small size and less than 8 terminals (pins) 4 is optimal
b) One of the socket should have all its terminal short-circuit when NOT plugged into the other.
c) When plugging the above to the other connector the terminals should be no longer short-circuit.
d) The socket that should have its terminals short-circuit when unplugged must hold tightly a TO-72 (metal canned with 4 terminals) packaged transistor (without any soldering if possible).
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top