cyaniccypher
Newbie level 5
Hello.
We have a full bridge power supply. And the secondary side of the transformer rings pretty heavily with low load and no load conditions. What is a good snubber/clamp design that can be used here that does not dissipate large amounts of power. (see attached image).
Here are some of the specs:
Switching frequency: 150kHz
Output Voltage: +-125V
Output Current: 0.25A (60W power).
Thanks for the help.
We have a full bridge power supply. And the secondary side of the transformer rings pretty heavily with low load and no load conditions. What is a good snubber/clamp design that can be used here that does not dissipate large amounts of power. (see attached image).
Here are some of the specs:
Switching frequency: 150kHz
Output Voltage: +-125V
Output Current: 0.25A (60W power).
Thanks for the help.