Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Small RF remote with two digit LCD display.

Status
Not open for further replies.

tapu

Full Member level 5
Full Member level 5
Joined
Sep 15, 2014
Messages
244
Helped
1
Reputation
2
Reaction score
2
Trophy points
1,298
Location
india
Activity points
3,145
small rf remote with two digit lcd display.

Dear all,
I have made wireless token indicator.By using rf transmitter & reciever.token number indicates in large 3 digit LED display.token no. Is incremented by 4 switch remote( battery operated).here i want to add 3 digit Lcd display in remote side alongwith switches.which has small power & operates in battery power.but how to design & which components or ic's are required? Please reply.
Thanks,
Tepu
 

Re: small rf remote with two digit lcd display.

7 segment LCM is the best choice for you , I think
they have low power consumption
some of them are provided with internal decoder IC and you can connect them through serial communication
you can find them easily

once ihave used some from "sunman"
www.sunman.com.cn
 
  • Like
Reactions: tapu

    tapu

    Points: 2
    Helpful Answer Positive Rating
Re: small rf remote with two digit lcd display.

Dear all,
Here i am using 8051 & Ic 12D & 12E for rf module.as I give Hi pulse in transmitter side then i take same pulse in reciever side.& that pulse will increment token number.But if communication interrupts then number is not same in both side.But now i want to modify circuit as the digit on transmitter side transfer to reciever side.can it be possible by seriel two wire communication?can it be possible in this wireless communication? please reply how to do this.
Here i am using this module

rf module.JPG

Thanks,
Tepu
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top