Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Size of the Ground plane for designing of an Antenna

Status
Not open for further replies.

Gopinath Samanta

Newbie level 2
Newbie level 2
Joined
Oct 21, 2014
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
19
What should be the size of a Finite ground plane and Infinite ground plane in terms of wavelength for an Antenna?....
 

For sure it depends on the antenna. Some antennas don't require any ground plane. A rule-of-thumb for you is to use 3 to 5 wavelength for a ground plane, but the more the better always.
 
u can use any size of ground plane
but depends on constraint. when you will increase ground plane size gain will increase
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top