The bend situation can be easily simulated in 3D simulators like HFSS. If u insists using ADS, remember that the curved parts can only be modeled at the xy plane, since the geometry along the z axis should be uniform.
The bend situation can be easily simulated in 3D simulators like HFSS. If u insists using ADS, remember that the curved parts can only be modeled at the xy plane, since the geometry along the z axis should be uniform.
By taking advantage of the modeling capability of HFSS, it is easy to simulate the bend situation. In particular, there are two features which facilitates this kind of modeling greatly:
1) Sweep - sweep a line to form a sheet, sweep a sheet to form a solid
2) Thicken - a sheet can be thickened to form a solid with an assigned thickness