Hi,
I've never seen a high side drive like this. I did'nt go into detail, but it still refers to GND, which I told you already is the wrong way.
So you did not follow my recommendation. You did not communicate why. You did not communicate which application note the idea/circuit is from.
I guess you will have your reason for this.
Simple question:
Does it work as expected?
* yes: be happy
* no: re read my posts. Follow what I have told you
Generally:
It's your job to look fir datasheets. When I get an electronics design job, it's quite common that nobody gives me a datasheet and nobody does the internet search for me.
You have the simulation tool. You have the schematic. And you have the expectation/idea how your circuit should work.
So it's the easiest way that you use the simulation to find out whether it does work as expected or not.
If it does not work as expected: give complete informations, like
* what did you expect?
* how did you test it?
* what is not like expected?
Give links to datasheets and application notes you used to design this circuit.
I'm interested in finding a solution fast. I'm not interested in repeating informations an lengthy threads.
I recommended to work through application notes. Maybe these application notes are 10 pages or more, thus it should be clear that the information can not be compressed in a couple of lines in a post reply. You have to do some work on your own - like every electronics designer.
I read many datasheets per day and have a lot of my knowledge from thousands of application note pages
A forum can't replace: school, doing internet search, reading documents.
Klaus