Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

sim900a serial communication problem

Status
Not open for further replies.

peeyushsigma

Member level 4
Member level 4
Joined
Apr 15, 2012
Messages
77
Helped
19
Reputation
38
Reaction score
17
Trophy points
1,288
Location
Bengaluru, Karnataka, India
Activity points
1,774
hi everyone,
i am using sim900a gsm module ...i have connected the module through serial port ..but when i am sending any command like AT..the reply is
the same ...please help ....
baud rate is 1200 ,1 stop bit ,no parity bit ..
 

Perhaps you need to explain.
You have a sim900 GSM module. That one has what looks like DB9 RS232-type serial connector to interface with a PC.

To get any of these to work, you normally need a SIM card and arrangement with a mobile network operator.

So - if you have a working interface to your PC, you would be able to say that you actually got a reply to a serial command, even if it was not the reply you wanted.
How do you deliver commands?
From a terminal emulator maybe? From supplied software interface program?
We probably cannot help much unless you can more describe the hardware setup, and what you have already managed to do by yourself.
 

thanks for replying..
i am attaching a picture of board .. DSC_0336.jpg
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top