Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

sim900 soldering; How?

Status
Not open for further replies.
A

abdi110

Member level 3
Joined
Mar 5, 2015
Messages
60
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,728
hello,
Could you please help me how can I solder a sim900 on a PCB?
 

Do you mean how to build your own SIM900 or do you mean how to connect the SIM900 to a PCB board.
 

I think he mean to solder the ready-made SIM900 to PCB.
So,it is soldered on component side itself like SMD components. You can solder using SMD soldering. Your PCB pads should be a little longer such that the bottom pads of SIM900 sit on it and also a portion of the PCB pad is available to solder from the outside.
 
Thank you, Yes I mean to solder the ready made SIM900 to PCB.
I want some help to show me how to solder one sim900 on pcb.
Thanks again,
 

Does any one have some pic to show how to solder a sim900 module on the pcb?
And what kind of soldering tools should be used?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top