Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

sim900 modem showing cpin not ready..why?

Status
Not open for further replies.

hari516

Newbie level 6
Newbie level 6
Joined
Feb 22, 2012
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Mumbai
Visit site
Activity points
1,394
Here,

I am testing the sim900 at commands in Hyper terminal.Its works properly wants to implement my program.

I am able to ready the sms by using at+cmgr=sms number
eg:at+cmgr=8 which upon displays sms details. If i want to see the sms that has sent immediately,before even typing the command in typerterminal ..i'm getting +CPIN not ready...here after any at command that i enter will return error only...

Kindly let me know whta could be the problem.Right now am checking the sim900 through USB cable not through serial cable.

One more doubt i want to clear at+cfun=1 is same as reset modem..but it doesnt show any call ready message.when i do unplug and plug the power supply then only it shows

+CFUN 1
+CPIN Ready

call Ready ....then only i command at+cmgr works...? is there any alternative forreset instead of removing the power supply again and again...am new to this technology...if it is a silly question....kindly consider as a mewbie person and pls reply....
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top