desgin
Full Member level 1
Hello All,
I am working with PIC micro controller & SIM800 GSM Module.
My requirement is to send data continuously to server by GSM Modulle.
I am using Docklight software for the serial communication.
While connecting with TCP its showing Connection failed.
Below are the commands which i used.
1. AT// RESPONSE IS OK
2. AT + CIPSHUT // RESPONSE IS OK
3. AT + CIPMUX = 0 // RESPONSE IS OK
4. AT + CGATT = 1// RESPONSE IS OK
5. AT + CSTT = "APN", "", "" // RESPONSE IS OK
6. AT +CIICR // RESPONSE IS OK
7. AT + CIFSR // RESPONSE IS some ip number
8. AT + CIPSTART = "TCP". " PUBLIC IP", "PORT" // showing me OK TCP CLOSED
So till 7th Step, everything is OK but for 8th, its problem so unable to send the data.
Can anybody help me for this.
Thanks in advance
Design
Pune, India
I am working with PIC micro controller & SIM800 GSM Module.
My requirement is to send data continuously to server by GSM Modulle.
I am using Docklight software for the serial communication.
While connecting with TCP its showing Connection failed.
Below are the commands which i used.
1. AT// RESPONSE IS OK
2. AT + CIPSHUT // RESPONSE IS OK
3. AT + CIPMUX = 0 // RESPONSE IS OK
4. AT + CGATT = 1// RESPONSE IS OK
5. AT + CSTT = "APN", "", "" // RESPONSE IS OK
6. AT +CIICR // RESPONSE IS OK
7. AT + CIFSR // RESPONSE IS some ip number
8. AT + CIPSTART = "TCP". " PUBLIC IP", "PORT" // showing me OK TCP CLOSED
So till 7th Step, everything is OK but for 8th, its problem so unable to send the data.
Can anybody help me for this.
Thanks in advance
Design
Pune, India