Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Sim300 module and EVB

Status
Not open for further replies.

sundus abrar

Junior Member level 1
Joined
Jan 18, 2010
Messages
16
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,418
Hello every one!i purchased a sim300 EVB (hardware description attached) but the vendor did not provide me with the actual sim300 module.and the problem is that this sim300 module is not available in my city,and i cant travel myself to the other city to get it.hence i am getting it delivered..

now i asked the sim300 module's vendor if i'd need some sort of connector to connect my module with the EVB.he believes that the EVB itself contains a small connector and no external connector would be required to connect them.

so here is my question,does anybody have any experience with the sim300 EVB? can you please tell me if i need separate connectors for both of them to work?

i am really running out of time,a quick response would be highly appreciated.
 

Attachments

  • SIM300-EVB_UGD_V1.03.pdf
    992.6 KB · Views: 7

sundus abrar

Junior Member level 1
Joined
Jan 18, 2010
Messages
16
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,418
never mind!!the module connects to the board without any external pins required!
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top