wsflai
Newbie level 1
Hi,
I am running Silvaco Mixedmode with a cylindrical atlas device. In my SPICE-like circuit description, I have already used the cylindrical options:
.options CYLINDR
However, when I run the simulation, the following error occurred:
Error: Electrode # 1, SOURCE , has zero thickness.
A DEVICE3D electrode must have an associated thickness.
The SOURCE electrode is defined in Atlas as:
ELECTRODE NUMBER=1 NAME=SOURCE R.MIN=7 R.MAX=8 A.MIN=40 A.MAX=50 Z.MIN=-0.11 Z.MAX=0
What could be the problem? Thank you.
I am running Silvaco Mixedmode with a cylindrical atlas device. In my SPICE-like circuit description, I have already used the cylindrical options:
.options CYLINDR
However, when I run the simulation, the following error occurred:
Error: Electrode # 1, SOURCE , has zero thickness.
A DEVICE3D electrode must have an associated thickness.
The SOURCE electrode is defined in Atlas as:
ELECTRODE NUMBER=1 NAME=SOURCE R.MIN=7 R.MAX=8 A.MIN=40 A.MAX=50 Z.MIN=-0.11 Z.MAX=0
What could be the problem? Thank you.