Hi, I construct an inverter using sg3524, when I power it up and measure the output of the sg3524 to get the idea of the level of the pwm voltage output, the reading I got are as follows;
input voltage=12v
Pin no. voltage readings
6 ----------------------3.75v
7-----------------------2.25v
11----------------------5.89v
14----------------------5.89v
12,13,15---------------12v
16----------------------4.99v
As i don't have an oscilloscope, I can verify the output waveform. So, i want to know, if the readings I have above (using digital multimeter) are correct. And if not, what could be the problem.
Note: according to sg3524 manufacturer datasheet
Vce(sat) = 2v
Vc = 18v @ Supply(Vdd) =20V