Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Setting enclosure UWB planar on AWR MWO

Status
Not open for further replies.

bepsml

Junior Member level 3
Joined
Nov 10, 2010
Messages
27
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,430
I have a design for UWB antenna using AWR MWO 2002 v5
just want to make sure what the antenna enclosure setting has correct configuration
for every one who experienced or expert on AWR, kindly to review attached file and i hope a correction

regard

MWO files View attachment UWB.rar
Reference View attachment REF.rar
 

bepsml

Junior Member level 3
Joined
Nov 10, 2010
Messages
27
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,430
if the patch have a same width with feeder, is it can be still as a patch?
for some substrate thick there has no ground on back side, and add a shape on same side with conductor, how it be same function of groundplane, is it CPW structure but have different formula to calculate feeder width
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top